;
; Copyright (c) Microsoft Corporation, 2012
;

[Version]
Signature   = "$WINDOWS NT$"
Class       = SCSIAdapter
ClassGuid   = {4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider    = "%MSFT%"
PnpLockdown = 1
DriverVer   = 06/21/2006,6.1.7601.23403

[SourceDisksNames]
1 = %DiskName%,,,

[SourceDisksFiles]
stornvme.sys = 1

[DestinationDirs]
; DIRID_DRIVERS
DefaultDestDir = 12

[ControlFlags]
BasicDriverOk = *
ExcludeFromSelect = *

[Manufacturer]
%MS-NVME% = NVME, NTx86

[NVME.NTx86]
%PCI\CC_010802.DeviceDesc% = Stornvme_Inst, PCI\CC_010802

[Stornvme_Inst]
CopyFiles = Stornvme_copyfiles

[Stornvme_copyfiles]
stornvme.sys,,,0x100

[Stornvme_Inst.HW]
AddReg = Stornvme_Inst_HW_AddReg

[Stornvme_Inst_HW_AddReg]
; registry values related to MSI support
HKR, Interrupt Management, 0x00000010
HKR, Interrupt Management\MessageSignaledInterruptProperties, 0x00000010
HKR, Interrupt Management\Affinity Policy, 0x00000010

;
; The MSISupported entry determines whether the device supports MSIs. Set it to 1 to enable MSI support.
;
HKR, Interrupt Management\MessageSignaledInterruptProperties, MSISupported,       0x00010001,   1

;
; The MessageNumberLimit entry specifies the maximum number of MSIs to allocate. 
; For PCI 2.2, MessageNumberLimit must be 1, 2, 4, 8, or 16. For PCI 3.0, MessageNumberLimit can be any number up to 2,048.
; Set it to 65 so that 64 IO Queues and 1 Admin Queue can have different messages.
; Note that this number should be increased to "Processor Count + 1" if the driver runs on machine with more processors.
;
HKR, Interrupt Management\MessageSignaledInterruptProperties, MessageNumberLimit, 0x00010001,   65

;
; Make sure all processor in group are used to serve interrupt from this device. IrqPolicySpreadMessagesAcrossAllProcessors (5)
;
HKR, Interrupt Management\Affinity Policy, DevicePolicy,   0x00010001, 5

;
; Specifies that the device's interrupts are of high priority. This setting is appropriate for devices that require low latency. IrqPriorityHigh (3)
;
HKR, Interrupt Management\Affinity Policy, DevicePriority, 0x00010001, 3

;
; Allow interrrupt happens on processors beyond group 0. (e.g. might be in a single group other than 0)
;
HKR, Interrupt Management\Affinity Policy, GroupPolicy, 0x00010001, 1

;
; Enables Storport IPM for this adapter
;
HKR, "StorPort", "EnableIdlePowerManagement", 0x00010001, 0x01


[Stornvme_Inst.Services]
AddService = stornvme, 0x00000002, Stornvme_Service_Inst, Stornvme_EventLog_Inst

[Stornvme_Service_Inst]
DisplayName    = "%StorNVMe_ServiceDesc%"
ServiceType    = 1
StartType      = 0
ErrorControl   = 3
ServiceBinary  = %12%\stornvme.sys
LoadOrderGroup = SCSI Miniport

AddReg         = nvme_registry_values
;AddReg         = nvme_registry_device_specific_values

[nvme_registry_values]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001

; NOTE: bustype 0x11 is value of BusTypeNVMe
HKR, "Parameters", "BusType", 0x00010001, 0x00000011

; Default timeout value 10 seconds
HKR, "Parameters", "IoTimeoutValue", 0x00010001, 0x0000000a

;[nvme_registry_device_specific_values]

[Stornvme_EventLog_Inst]
AddReg = Stornvme_EventLog_AddReg

[Stornvme_EventLog_AddReg]
HKR,, EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,, TypesSupported, 0x00010001, 7


;********************************************************
[Strings]
;Non-Localizable
MSFT = "Microsoft"

;Localizable
DiskName                 = "Microsoft NVMe Device Driver Installation Disk"
MS-NVME                  = "Standard NVMe Controller (Microsoft)"
PCI\CC_010802.DeviceDesc = "Standard NVMe Controller (Microsoft)"
StorNVMe_ServiceDesc     = "Microsoft NVMe Driver"